(PR) Thermaltake Announces the ISGC-V320 VGA Cooler
Products of Thermaltake's ISGC series have become representative of silent and good performance coolers. Users have already been expecting the newest ISGC VGA cooler to complete the collection. Now, finally the ISGC-V320 is coming with lots of killer features.
The ISGC-V320 is a true masterpiece of Thermaltake's R&D team. Its foremost feature, as a matter of course, is its surprising silence which it inherited from the original ISGC Fan. The ISGC-V320 is equipped with two 120 mm ISGC fans. Users can adjust the fan speed from 800 to 1300RPM according to their needs. Broad compatibility of the ISGC-V320 greatly enhances its convenience factor. Supported are the last graphics cards such as the NVIDIA GeForce GTX 285 and ATI Radeon HD 4890. 5 heatpipes in combination with a large dissipation surface ensure best performance under high stress. With these powerful parts, ISGC-V320 can easily take loads of up to 320W.
Read More ...
Sapphire HD 4890 Vapor-X Gets 2 GB Variant
Major ATI partner Sapphire is releasing a variant of the HD 4890 Vapor-X accelerator, with double the amount of memory: 2 GB. Being a variant, it retains the rest of the feature-set, with a blue non-reference PCB, Sapphire Vapor-X GPU cooler, and separate heatsinks over the VRM and memory areas. The card comes with clock speeds of 870/4200 MHz (core/memory), and provides output from DVI, HDMI and DisplayPort connectors. It is expected to retail in Europe for as low as 226 EUR.
Source: TechConnect Magazine
Read More ...
Zalman CNPS9900-NT Closing In
Having released the 120 mm copper monstrosity, the CNPS9900, Zalman is looking to give the NVIDIA-branded CNPS9700-NT an update, only this time, there's no NVIDIA branding to be seen. The CNPS9900-NT is decked with nickel-plated copper, which gives it the chrome appearance. Between the two copper-fin blocks, is nested a 120 mm green LED lit fan, which gives the same illumination as the older NT versions of Zalman's coolers. It measures 94 x 131 x 152 mm (LxWxH), and weighs in at 730 g. The fan spins at speeds between 1000 and 2000 rpm. The cooler supports all current CPU socket types, including LGA-1366, LGA-1156, LGA-775, and AM3/AM2(+). It packs a tube of the company's ZM-STG2 thermal compound. When released in Europe, it is expected to sell for 70 EUR.
Source: TechConnect Magazine
Read More ...
FurMark Returns with Version 1.7.0
Nearly four months after its previous version, the chaps at oZone3D have released Furmark 1.7.0. This release packs a host of nifty new features, and a number of bug fixes. For starters, FurMark is able to work along with GPU-Z to provide real-time readings on the graphics card's temperatures, voltages and VDDC current (for cards that support it). An experimental feature allows you to Twit your score onto your Twitter account. While the stability test or benchmark is running, the main GUI stays minimized, so you needn't have to start another instance to run several tests.
With multiple GPUs doing the rendering, each GPU is given its own temperature graph. You can start or stop the rendering by hitting the space key without having to close the window. A number of new resolutions have been added, and the application is now also available in Castilian, Bulgarian, Polish, Slovak, and Spanish, thanks to translations. Issues relating to temperature updates in the graph, and the application's multithreading management are resolved. Give your graphics cards a sunbath.
DOWNLOAD: FurMark 1.7.0
Source: Geeks3D
Read More ...
ASUS P7P55 EVO Detailed
ASUS' P7P55 series includes the company's mainstream-thru-premium motherboards based on Intel P55 chipset, supporting LGA-1156 socket processors. Following the recent exposأ© of its little sibling the P7P55 Pro, XFastest took the higher-end P7P55 EVO for a photo-shoot. This motherboard retains its lesser sibling's feature-set for the most part, except for additional connectivity. The CPU is powered by a 14-phase power circuit. Additional power management is provided by the ASUS EPU chip. The expansion slots include three PCI-Express x16 slots.
The first two arrange as (x8, x8) electrically, while the third one is electrical x4. Two PCI-E x1 and two legacy PCI slots make for the rest of the expansion. The connectivity options of this board will include support for SATA III. Apart from the six SATA ports the P55 PCH provides, an additional Marvell 88SE9123 two-port PCI-E SATA III controller is present, which also provides an IDE connector. Apart from the 8-channel audio, Firewire, and 14 USB ports in all, there are two gigabit Ethernet controllers. More pictures can be found at the source.
Source: XFastest
Read More ...
AMD Readying Low Cost ''Suzuka'' Opteron Processors
Over a month into the release of its flagship enterprise processor, the six-core Opteron codenamed "Istanbul", the company expressed plans to roll out another line of Opteron chips, this time targeting the cost-effective SME market, and not exactly power scaling and parallelism offered by its two-socket and multi-socket capable Opteron 2000 and Opteron 8000 series. The new quad-core processor will be codenamed "Suzuka", and will be made for single-socket systems. For this reason, it will not use the 1207-pin Socket F, but rather the AM3 socket, and will be compatible with existing AM2(+) motherboards that support the Budapest quad-core chip (single socket version of Barcelona).
Suzuka shares the same die design as Shanghai (Opteron) and Deneb (Phenom II). It features four x86-64 processing cores on a monolithic die, with 512 KB of L2 cache per core, and a shared 6 MB L3 cache. Dual DDR2/DDR3 memory controllers work in ganged or unganged dual-channel modes. Currently three models are ready, the 2.50 GHz Opteron 1381, 2.70 GHz Opteron 1385, and 2.90 GHz 1389. These chips are specified to come with system bus speeds of 2200 MT/s (HyperTransport bus actual speed of 1100 MHz). All three models come with a rated TDP of around 115 W, and is built on the 45 nm SOI process. Opteron 1381 is priced at US $189, Opteron 1385 at $229, and Opteron 1389 at $269.
Source: AMD
Read More ...
(PR) Thermaltake Unveils ProWater PW880i Water Cooling System
Thermaltake, leading provider of computer cooling solutions, is introducing their latest addition in their wide range of liquid cooling products, the PW880i gets your PC in gear for the coming summer heat. In addition to this big size water cooling system, Thermaltake also offers water cooling solutions for VGA cards (WB400) and for the motherboard North Bridge (WB200), tailored for your individual cooling needs.
The PW880i is a powerful liquid cooling solution for the core of your PC the CPU. With a 24cm radiator equipped with two 14cm fans this is the ideal device for efficient heat dissipation. The solid CPU water block is made of pure copper with delicate brazing technology. Supporting most mainstream CPU sockets such as Intel LGA1366 and AMD AM3, the PW880i sports excellent cooling performance for demanding users and overclockers alike. As the tank and pump can be placed outside the chassis it offers two practical advantages: you gain more space within the case itself and maintenance is made easier and more convenient.
Read More ...
MSI Offers Windows 7 Upgrades too
With Microsoft close to the finalization of Windows 7, MSI today also announced that from June 26 onwards it will support the Windows 7 upgrade offer that gives consumers the opportunity to pre-book Windows 7 upgrades online for a small processing fee. Once Windows 7 is officially released, Windows 7 upgrade DVDs will be sent out to consumers by Microsoft so they can upgrade their Vista operating system to the latest Windows 7. This offer will apply to owners of specific new and used laptops and all-in-one PCs under the MSI brand with legal Microsoft Windows Vista Home Premium, Business and Ultimate operating systems. The offer is legit till January 31, 2010. You can find more information on the MSI Windows 7 upgrade offer here.
Source: MSI
Read More ...
No comments:
Post a Comment